Virtual
07 Cooling System: Filling the system with new coolant
Free
In this video, we will walk you through the correct procedure for refilling the cooling system. Properly adding coolant is crucial to ensure optimal engine temperature regulation and prevent overheating. We’ll cover the necessary steps to s...
afely fill the system, eliminate air pockets, and check for leaks. Additionally, we’ll explain how to monitor coolant levels and ensure the system is fully pressurized and functioning correctly before the vehicle is put back into service.
Virtual
Fuel Module, Fuel Tank Strap and Filler Neck Replacement, 99-04 RAM 2500-3500 Diesel
Free
This step-by-step guide walks through the process of replacing the fuel pump assembly, filler neck, and fuel tank straps on a 2002 Dodge Ram 2500 with a 5.9L diesel engine. It covers each part of the job—from safely lowering the fuel tank t...
o installing the new components and ensuring everything is properly secured. While the example shown is a 2002 model, some procedures may differ slightly depending on your truck’s specific year or configuration.
Virtual
Fuel Pump Assembly, Filler Neck and Tank Replacement for 97-02 Blazer and Jimmy
Free
This step-by-step guide covers how to replace the fuel pump assembly, filler neck, and fuel tank on a 1998 two-door GMC Jimmy equipped with a 4.3L engine. The process includes safely lowering the old tank, removing worn components, and inst...
alling the new parts with proper alignment and fit. While the vehicle used for demonstration is a 1998 model, certain steps may vary depending on the year or configuration of your vehicle.
Virtual
Fuel Pump, Filler Neck, Fuel Tank and Straps Replacement--1996 Blazer, Jimmy, Oldsmobile Bravada
Free
This step-by-step guide walks through the replacement of the fuel pump assembly, filler neck, fuel tank, and fuel tank straps on a 1996 Oldsmobile Bravada with a 4.3L engine. The process includes safely lowering the fuel tank, removing old ...
components, and installing new parts to restore proper function. While the example shown is a 1996 model, some procedures may vary depending on the specific year or setup of your vehicle.
Virtual
GDI Fuel Pump Overview and Installation
Free
This video provides an overview of the functioning of the Gasoline Direct Injection (GDI) pump and outlines the main steps involved in its replacement. The GDI pump plays a crucial role in delivering precise fuel injection into the combusti...
on chamber for optimal engine performance and fuel efficiency. During the replacement process, we’ll guide you through the key steps for removing the old pump, installing the new one, and ensuring proper calibration. It’s important to always refer to the manufacturer’s installation instructions and recommendations to ensure a successful and safe replacement, as improper installation can affect performance and vehicle safety.
Virtual
The procedure for reprogramming the electronic throttle control in a Nissan
Free
After installing the electronic throttle body (ETB), follow these steps to complete the final inspection and perform any necessary PCM reprogramming. This ensures the new component is recognized by the vehicle’s system, operates correctly, ...
and delivers optimal engine performance. Carefully verify all connections, check for fault codes, and follow the proper procedure to reset or update the PCM as required.